Pulsar-23 FAQ
-
- Topic
- Voices
- Last Post
Viewing 10 posts - 1 through 10 (of 10 total)
Viewing 10 posts - 1 through 10 (of 10 total)
Home › Forums › Instruments › PULSAR-23 › Pulsar-23 FAQ
Hello Friends,
We’ll attempt to compile frequently asked questions here as we receive them. If you have any questions, tips or such please feel free to reply to this post, and we’ll add them as we go, thanks : )
Доброго времени суток, уважаемая редакция!
Житель Санкт- Петербурга передает вам следующий вопрос: как отвязать midi назначения или, попросту, сбросить их? Мануал прочитан, ответ не найден.
I have the same question as above
Pulsar is tricking me with midi!!!
In the beginning all midi connection worked perfect:
ch.1 – BD, ch.2-BASS, ch.3-SN, ch.4-HH
But recently Pulsar stoped responding to previous (above) midi setup and triggers All modules from midi ch.1 simultaneously.
By some manipulations with LRN buttons I tried to separate some of the models and tried to assign them to their corresponding number (channel) but still no result. If BASS and HH modules responded to midi info from ch.2 and ch.4, BD started to copy the midi info of ch.4 and SN module triggered against, not in time with midi info ch.3
How to bring it back to midi sanity and what went wrong?
I use Octatrack MKii and Ableton 10 and AudioFuse rev2
From the manual:
To clear all learned MIDI functions, simultaneously press the LRN buttons of BD, BASS,
SD and HHT modules (the four buttons at the bottom).
Thank You! It did help. Midi communication is back.
Приветствую.
Можно ли использовать MIDI-конвертор Pulsar-23, как преобразователь MIDI-сообщений из DAW (например Reaper) в источник сигналов Gate и 1 v/oct? Если да, то как настроить такое преобразование?
Hi
I cant seem to copy and paste from banks on Pulsar following the steps am I missing something or might there be something a miss with my Pulsar Unit ?
Anthony,
Please remember the channels you wish to copy to must be in REC mode to accept any copying. It will also only copy for as long as you are holding down the copy/paste command. If you’re still have issues getting it to work feel free to email [email protected] and we can schedule a video call to sort it out.
Hi Guys
Thanks a million for the speedy reply . Great let me give it another go.
I will get back asap.
-A