Having Trouble with Firmware Update and/or USB

    • Topic
    • Voices
    • Posts
    • Last Post

Home / Forums / Instruments / FLUX / Having Trouble with Firmware Update and/or USB

Viewing 8 posts - 16 through 23 (of 23 total)
  • Author
    Posts
  • #19404 Reply

    dhoinjo
    Participant

      well, I bought the sandisc Cruiser that worked for you, and it still is not recognised. I contacted support and they replied to ask wehter I have access to a windows computer, because the problem might be mac related. I’m starting to get pissed off now.

      #19465 Reply

      dhoinjo
      Participant

        Update report: until today I have received ZERO mails from the EU division. Remarkable, to say the least. US division is answering my mails.

        I have managed to get hold of a HP laptop with windows 11. Formatted 3 disks, of 1GB, 8GB and 16GB and loaded the firmware on those. Not recognised by Flux.

        I suspect there is something wrong with my flux. And if it turns out there isn’t, the firmware update process needs some serious checking.

        #19466 Reply

        dhoinjo
        Participant

          update. US branch is the one responsible for technical issues, so that is why the EU branch doesn’t reply apparently. We are troubleshooting but it still is not solved.

          #19491 Reply

          music
          Participant

            I’ve got the same problem. None of the USB sticks I’ve tried so far have been recognised.
            That’s why I sent the first Flux back. The second one has the same problem.
            Saying here, ‘just keep trying until you find one’, isn’t helpful – in fact, it’s very frustrating.
            It’s also become difficult to find low-capacity sticks these days.

            The Yamaha 4GB you mentioned: where are you supposed to buy one? I’ve never heard of Yamaha producing USB sticks.
            Certainly not in Germany.

            #19492 Reply

            dhoinjo
            Participant

              I finally succeeded to upload the new firmware. They eventually sent me a stick that worked. For some reason I could not make the firmware load onto a properly formatted usb drive. I tried 6 different sticks, tried to buy really old ones, but they just didn’t work. Not on my mac, or on a friends computer (windows 11)

              #19493 Reply

              moogyloogy59
              Participant

                I have had the same problem, emphasis HAD.I got over 20 different USB Sticks.Ranging in size and brand.Finally I got a 1 gig brandless USB stick from eBay.It was unformatted.Success.

                I believe that the formatting process is the problem.

                All of the firmware updates

                I have done on SOMA products were unformatted.Just used them out of the the package.Success!! Further…

                I believe that Soma, should provide a functional USB Stick with every FLUX Purchase.All of this bullshit

                Could be avoided.All is. Good Now.Best of luck to all.

                #19498 Reply

                ground_grown
                Moderator

                  If you’re still having trouble, try contacting tech support at [email protected]

                  They’ll assist with more in-depth troubleshooting and send a tested functional flash drive if necessary.

                  #19500 Reply

                  music
                  Participant

                    After buying a SanDisk Cruzer USB stick on the recommendation of a post here on the forum – which also wasn’t recognised – I’m now writing to customer support. Thank you for your help so far.

                  Viewing 8 posts - 16 through 23 (of 23 total)
                  Reply To: Having Trouble with Firmware Update and/or USB
                  Your information:





                    Copyright by SOMA Laboratory privacy_link_footer2
                    Right Menu Icon