Sound on ‘Tune’ knob on HHT drops and becomes static.

[Kevin]

<p style=”text-align: center;”>Howdy gang.</p>
having an issue with the TUNE knob on the HHT section of the pulsar.

Holding down the add button (no clips on the pins anywhere) I get a tone which I manipulate with the filters/ and warp knobs. HOWEVER.

If I move the tune knob counter clockwise from the 12 o clock position on the dial, the signal seems to drop and it only sounds like crackling static.

ive tested the other tune knobs on the other sections and they all seem to work fine. Just the HHT section that seems to do this.

any ideas?

[ground_grownModerator]

This can sometimes occur when the tune range and HPF range do not overlap at all and all the sound is being filtered out, especially when the HPF FR setting is below around the 9 o’clock position

[Author]

Posts