Cosmos Not Booting – Unresponsive

    • Topic
    • Voices
    • Posts
    • Last Post

  •  

Home / Forums / Instruments / COSMOS / Cosmos Not Booting – Unresponsive

Log In Register Lost Password
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 26, 2026 at 1:04 pm #19496 Reply

    nateconnelly
    Participant

      Recently my Cosmos isn’t running the boot when switched on. The green output light comes on but there is no response from anything else, including the switches – no input or output whatsoever.

      I have tried running the firmwave recovery but it’s the same story. Any advice would be most appreciated.

      October 27, 2026 at 9:51 pm #19497 Reply

      ground_grown
      Moderator

        Have you traveled with it or anything?

        This generally occurs when either the firmware upload failed and needs to be reinstalled, or if the unit was dropped hard enough that the smaller digital board inside the unit comes partially unplugged from the control board.

        May be worth popping the back off to make sure the board is still firmly plugged in.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      Reply To: Cosmos Not Booting – Unresponsive
      Your information:






        Copyright by SOMA Laboratory privacy_link_footer2
        Right Menu Icon