Cosmos Not Booting – Unresponsive

[nateconnellyParticipant]

Recently my Cosmos isn’t running the boot when switched on. The green output light comes on but there is no response from anything else, including the switches – no input or output whatsoever.

I have tried running the firmwave recovery but it’s the same story. Any advice would be most appreciated.

[ground_grownModerator]

Have you traveled with it or anything?

This generally occurs when either the firmware upload failed and needs to be reinstalled, or if the unit was dropped hard enough that the smaller digital board inside the unit comes partially unplugged from the control board.

May be worth popping the back off to make sure the board is still firmly plugged in.

[Author]

Posts