Low volume from clock divider

- Topic
- Voices
- Posts
- Last Post

Log In Register Lost Password

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
February 18, 2021 at 7:06 am #6512 Reply
Ryan
If I attach a clock divider to the trig input (or first pass it through the impulse circuit) the volume is quite a bit lower than if I play directly via the LR. Is that normal? I feel like I’ve seen different behavior in videos online, so I must be doing something incorrectly.
February 18, 2021 at 7:09 am #6513 Reply
Ryan
… and of course my attack was higher than I realized. Turning that down solved the problem.
March 8, 2021 at 6:56 pm #6550 Reply
Gabriel de Varine
hey i’ve got the same problem but only when I use a external trigger .. and I can’t use the ADD pad in the same time ..
But on HH and CLP it’s work great !
March 9, 2021 at 12:27 am #6551 Reply
SomaLabs
Keymaster
Pulsar works with 0-10v. If you are triggering from Eurorack, you are likely only sending max 5v. You need a stronger trigger signal most likely.
Author

Posts

Viewing 4 posts - 1 through 4 (of 4 total)

Copyright by SOMA Laboratory (This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.)