Low volume from clock divider

    • Topic
    • Voices
    • Posts
    • Last Post

Home Forums Instruments PULSAR-23 Low volume from clock divider

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #6512 Reply

    Ryan

    If I attach a clock divider to the trig input (or first pass it through the impulse circuit) the volume is quite a bit lower than if I play directly via the LR. Is that normal? I feel like I’ve seen different behavior in videos online, so I must be doing something incorrectly.

    #6513 Reply

    Ryan

    … and of course my attack was higher than I realized. Turning that down solved the problem.

    #6550 Reply

    Gabriel de Varine

    hey i’ve got the same problem but only when I use a external trigger .. and I can’t use the ADD pad in the same time ..
    But on HH and CLP it’s work great !

    #6551 Reply

    SomaLabs
    Keymaster

    Pulsar works with 0-10v. If you are triggering from Eurorack, you are likely only sending max 5v. You need a stronger trigger signal most likely.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Low volume from clock divider
Your information:




    Copyright by SOMA Laboratory (This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.) Privacy & Cookies Policy
    Right Menu Icon