ETHER

ETHER is a wide-band receiver that makes it possible to perceive the electromagnetic landscape around you.

ETHER is a kind of anti-radio. Instead of being tuned to a specific radio station, it receives all the interference and radiation that a traditional radio tries to eliminate in order to create a clean signal. It captures the radio waves “as is” from hertz to gigahertz, because it doesn’t contain the tuned input circuit that filters out all frequencies except the narrow band of a specific station. This allows ETHER to perceive the invisible electromagnetic landscape that humans created unintentionally, making possible live electromagnetic field listening and recording.
As the inspiration for this project, I took the design of the very first radios (early 1900s) that had no tuning wheel. At this time there weren’t many radio stations, and all of them used Morse code. It was possible to distinguish each transmitter by ear, as each one had its own specific timbre or “voice”.

ETHER is pocket-sized (105x65x20mm) and light-weight (93g). It consumes very little power and runs on two AAA batteries. How long it can run on two batteries is unclear, because I still use the very same set of alkaline batteries I put into the first ETHER prototype 6 years ago! (yes the project has taken 6 years). All I can definitely say is that battery life is more than 300 hours if you using alkaline or lithium batteries.

cof
the very first prototype of ETHER

We paid special attention to the design of ETHER, as it’s intended to be a unique accessory for the conscious modern human. We used top quality enclosures made in Germany and the latest technology for making the logo and the finishing. So with ETHER, you get both a unique sound experience and a cool-looking gizmo.

ETHER has both magnetic and electric components for sensing radiation. For the magnetic component, it has a built-in magnetic antenna, like the ones used in old long-wave radios. The antenna has maximum sensitivity on ETHER’s axis. By changing the orientation, angle and position of ETHER, you will change the sound. For the electric component, it has antennas printed on the PCB and the special input pin placed on the anterior surface.

ETHER AntennaL
You can touch any conductive material or surface (including your body) with the pin and use objects or yourself as a big external antenna! Often it makes a totally different sound and I love to check out different metal objects on a street (rails, tubes, metallic doors, parts of buildings etc.)

ETHER is not just an inductive sniffer like some projects you can easily find online. A simple low-frequency inductive sniffer will be silent in most places that are full of sounds in the video. Such devices need to be placed close to an emitting source and will not work on a street. All they contain is a coil and a low-frequency amplifier. In comparison, ETHER has a regenerative circuit and a demodulator, making it an actual radio wave receiver, not just an amplifier of low-frequency magnetic fields. However, ETHER can perceive the low-frequency magnetic fields as well. But, honestly, if your goal is to scan objects in close proximity (0-20 centimeters), devices like Elektrosluch will work cleaner and more focused due to its narrow band and lower sensitivity. ETHER was designed to be a part of your walks in the city and may even pick up sounds in a forest or at the seashore (I have such experience). Elektrosluch was designed for using over a table full of gear. Also, ETHER can perceive the electric component of the radiation as well, capturing radiation that is far above the audio range and is much more sensitive. Therefore, it has a significantly different design, functions and implementation than a simple inductive sniffer even if in some cases their functions can overlap.

ETHER is very sensitive to any kind of digital circuitry that’s in close proximity. This is why I didn’t put an SD-card recorder or something like that inside. You also have to make sure to keep other electronic devices that you carry (phone, laptop, recorder) at least 30cm/1ft away to avoid interference, but ETHER definitely works well when you walk around with a smartphone and laptop in other pockets and bags. The output of ETHER is a regular 3.5mm headphones’ stereo jack with L and R contacts connected in parallel (ETHER has a mono out). To record ETHER, you need to use an audio cable of at least 1m/3ft in length to connect it to a device like a ZOOM recorder. Even with a long cable, ETHER can sound differently than when using headphones. To get the purest sound, headphones are required. Some sounds you can record only with the mind, sorry. But the best snapshots are kept in our heart so let it be a part of the game:)

Here you can download the ETHER SONG placed at the end of the demo video. The archive contains the track in lossless and multitrack + used ETHER samples as well.
All of them are copyright free, so you can use them for any purposes including commercial use. All we ask is that you credit ETHER from Soma laboratory.

We hope that a new kind of field recording will arise with the release of ETHER. We want people to experience and enjoy the artificial urban environment in a new way. There is lots of sonic beauty to discover amid the concrete and steel grayness of the modern-day metropolis, a true invisible electromagnetic world for us to uncover. Take your friends and together go find the coolest disembodied electronic sounds of the urban and industrial landscapes around you!

The price and how to buy it:
The net price of ETHER is 120 euros.
The total price including shipping and handling to most countries, PayPal transfer fees and VAT will be 150-180 euros depends on country of delivery. We will specify the exact price when we receive your shipping address.

To buy ETHER please drop us an e-mail at [email protected] with “ETHER order” in the subject line and your full name, address and mobile phone number (needed for courier delivery) in your mail. Also, please provide us PayPal registered email to which we will direct our Invoice.

Vlad Kreimer 02.2019