hardwire voice outs to single jack outs internally?

- Topic
- Voices
- Posts
- Last Post

Viewing 7 posts - 1 through 7 (of 7 total)

Author

Posts
March 28, 2021 at 7:54 pm #6782 Reply
Fabian
hi, this instrument is just fantastic!! – quick question. I am considering installing an internal connection between the voice outs and the jack outs, simply because thats what I use them for and it would declutter the workspace having ch 1- 4 del / rev out hardwired internally.

how would I go about it ideally?

is there anyhing that would speak aginst that?

thanks !fabian
March 29, 2021 at 11:02 am #6785 Reply
SomaLabs
Keymaster
Yes, it is possible.

The simplest way is to remove the voice PCBs and connect the corresponding pins with wires.

I recommend using shielded wires with a grounded shield to avoid crosstalk that the wires may cause.
April 12, 2021 at 11:39 am #6798 Reply
Fabian
thank you! I have a follow-up question

-is it also possible to pick up the signal post-vol and hardwire that to the single outs?
April 12, 2021 at 6:00 pm #6799 Reply
SomaLabs
Keymaster
Yes it’s possible of course but needs a more complex invasion.

The simplest solution – just to pick up the signal from the middle pin of the VOL pot.
April 15, 2021 at 11:38 am #6786 Reply
Kevin
I just wanted to share what I’ve done that is along the same lines. I just put alligator clips on the ends of some 1/4in cables for the output pins:

https://drive.google.com/file/d/18FLYU0jXdfMcUVaLm60Qr-sTO_tAss7-/view?usp=sharing
April 15, 2021 at 11:39 am #6788 Reply
noiseg33k
Participant
I know it isn’t internal but wanted to share another option. You can also make 1/4in to alligator cables and just leave them connected to the output pins. The slightly larger cables lay down nicely in-between the pins and don’t really obstruct anything.

https://photos.app.goo.gl/98anou7or77JJ9WM9
April 16, 2021 at 9:36 am #6809 Reply
Fabian
interesting! thats a good idea, thanks for sharing
Author

Posts

Viewing 7 posts - 1 through 7 (of 7 total)