clock divider section not working in midi mode?

[chris]

Hi all,  I read in the manual :

“The Pulsar can receive MIDI clock which can synchronize the array of clock dividers and the
looper\recorder. To do this, turn the INT MIDI switch of the clock section to the MIDI position”

When I run my pulsar from (Ableton) midi and I switch the clock section to “midi”, the clock divider section/looper

does not run at all…

Can you help !

 

thank you

 

[Andrea]

I’m running into the same issue, I send midi from Ableton, switch to the Midi mode, and then all of the clock dividers and the clock pin itself don’t send any output.

Chris, did you have any luck with this?

Thanks,
Andrea

[Andrea]

Ok I fixed it! Go into the settings and make sure that your Midi output has the Sync box checked! That way it send clock information as well as midi notes.

Settings > Link/Tempo/Midi > Midi Ports > Out (Your Midi Device) > Check the Sync box!

[Author]

Posts