Reply To: The new PULSAR-23 Bass Drum module

We did not make A/B recordings to show the difference, because even slight changes in settings will change the nuance of the kick sound. Depending on settings, there can be no audible difference, or a big difference. Basically each kick will be identical with the switch enabled, whereas with the classic setting each kick can sound slightly different, or a lot different, depending on settings:

The BD oscillator restart switch is in the left bottom corner.
In the up position, marked as STAB, the BD oscillator will restart on each BD trigger.
In the down position, the BD works in the original Pulsar mode.
To make the restart function work stable, ATT knob must be in the minimum or very close to it.
REL must be short enough to decay before the next triggering.
Triggering velocity must be close to the maximum of 10V.
In some settings stability may also depends on TUNE knob position.