Having Trouble with Firmware Update and/or USB

    • Topic
    • Voices
    • Posts
    • Last Post

Home Forums Instruments FLUX Having Trouble with Firmware Update and/or USB

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #17461 Reply

    feflower

      Hello,

      I’ve tried three different thumb drives with the firmware.

      I tried updating the firmware, and I am not successful.

      I am not getting the “X” error message.

      I am getting the usual “c” with the rotating LED lights. And I can play the Flux as normal.

      To test further, I also tried using a thumb drive to save presets, but even this I am not getting the USB icon.

      Might anyone provide some guidance?

      Thank you very much

      #17462 Reply

      jimmy
      Participant

        Based on experience:

        Use as small a drive as possible, no larger than 8GB. Keep trying different drives of this type until one works. There’s no explaining why some drives work and some don’t. You just have to keep swapping in a different, small drive until you find one that works, then keep that one separate exclusively for use with the FLUX.

        #17463 Reply

        feflower

          Thank you Jimmy,

          My greatest fear is that something is faulty with the FLUX USB slot…..so I am glad to hear that there is still a chance that it may not be.  I’ve tried a 256MB and a 16 GB.   I will keep searching for a compatible drive.

           

          Many thanks again.

           

          #18543 Reply

          moogyloogy59
          Participant

            I am having the same issue.Suggest a Us drive Brand ?

            #18548 Reply

            moogyloogy59
            Participant

              Not only can I not get FLUX ,into USB MODE.I also cannot USB power the Breakout Box.Anyone have any ideas

              #18550 Reply

              hype

                im having similar issue. usb stick update not working, followed all steps….

                #18551 Reply

                moogyloogy59
                Participant

                  Not only has trying different USB THUMB DRIVES,yeilding

                  no results,I tried to power up

                  The Break Out Box,nothing.I am confident,that the FLUX USB PORT is defective.I tried to power up the Breakout Box,with my phone charger,and it powered up.Posts about using

                  Multiple USB thumb drives,of 8 gig,is Bull.I know now,it is a defective USB Jack,on the FLUX.

                  NOW WHAT.GOOD MONEY AFTER BAD?

                  #18552 Reply

                  noiseg33k
                  Moderator

                    You must use a low capacity drive formatted to Fat32. Try a 1 GB drive, it’s what I use.

                    The BoB will not receive power until the Flux has been updated so the lack of power to the BoB is expected.

                    #18560 Reply

                    Hype

                      found a very small usb 2gb stick in my trash pile and finally got the system update, breakout box working. After spending hours tinkering with midi assignment – I can’t help but wonder why soma just didn’t use the flux internal usb to allow computer midi control….

                    Viewing 9 posts - 1 through 9 (of 9 total)
                    Reply To: Having Trouble with Firmware Update and/or USB
                    Your information:




                      Copyright by SOMA Laboratory (This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.) Privacy & Cookies Policy
                      Right Menu Icon