Issue with time knob
-
- Topic
- Voices
- Last Post
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
Home › Forums › Instruments › ORNAMENT-8 › Issue with time knob
I created a simple loop : 1 to 2 to 3 to 4 etc and back to 1.
All time knobs are set on 12 o’clock position. Everything goes right until the 7th cell. When the cell is activated it never turns off. For it to turn off I have to turn the knob past 3 o’clock position.
I noticed same problem with no loop patched and I just press the set buttons : all cell turn off when time is over except 7th cell. Only way to turn it off is to press reset button.
Also If i set all time knobs just passed 3 o’clock position, the 7th cell turn off and then goes to 8th but the 7th is way longer than other cells. So there is definitely a time issue on the 7th cell.
Is there any sort of reset button inside the Ornament that could fix this problem? Or any other solution other than send it to Soma repair center?
Hi!
Please record a video where you demonstrate this problem and send it to Soma tech support at [email protected]