Home › Forums › Instruments › PULSAR-23 › Pulsar 23 – Individual Outputs no sound › Reply To: Pulsar 23 – Individual Outputs no sound
The easiest way to get proper signal is to send BD/BASS signal through the 10uF capacitor and then connect it to your interface’s input.
You need to patch the external output of BD or BASS to the input of this capacitor, and the output of the capacitor to the individual output on Pulsar, which you connect to your audio interface.
The 10uF capacitor is found on the top left of Pulsar, to the left of the Clock section.