Bass channel dead?

[six_waxУчастник]

Sadly, the bass channel on my Pulsar 23 suddenly is not working as it has been.

I have no patch cables connected.

Attack, release, and tuning seemingly have no effect. (Warp and the filters do effect the sound… but the oscillator seems dead. The output when manually pressing the ADD key is a low rumble… sounds like a very low frequency sawtooth rumble. (Again, Tune has no effect)

Can you advise? (All 3 other channels are working normally)

(I’ve done very little patching on this unit fwiw… was really just finding my way around.)

[noiseg33kУчастник]

Please check the switch on the bass channel to make sure you don’t have it set to MIDI mode.

[Автор]

Сообщения