Home › Forums › Instruments › PULSAR-23 › looping two separate banks
Hello,
Is it possible to, record two separate banks and sequence them in a loop? without changing the bank manualy using the bank button?
Hi There,
thanks for your question, if understood correctly, you meant chaining the bank’s ala song mode, if so that isn’t possible as the pulsar was designed to be a spontaneous live performance-oriented instrument. As an alternative, you can use an external sequencer via midi or CV for the more traditional methods of sequencing, yet we would encourage pressing REC on your audio recorder, perform and then edit away, way cooler results that way 🙂
true that, not song mode per se, more like extending the loop to 2 bars or 3
Sure, depending on how you’re syncing and using the loop channels, one way is by sending out a smaller clock ratio (from the clock divider) to the loops channel clock input.. e.g. a smaller ratio will essentially allow the loop channel to get longer(or shorter) in relation to others.
