tap (and other external) tempo control

[AviZivParticipant]

Can you achieve a similar range of tempos using tap-tempo, as using the knob – for both LFO/ARP and ECHO ?  Somehow I can only get a limited range meaning I can’t get as slow or as fast as the knob by quite a bit. Perhaps my tapping technique is not right. I assume we need at least 4 taps to capture the new speed. Interested to hear from others.

I didn’t see a spec on what min/max bpm should be achieved with any external clock – tap/midi/cv

Thanks!

[SomaLabsModerator]

The lower limit is 45 BPM, the upper limit is how fast you can tap your finger.

[AviZivParticipant]

Thanks!

[AviZivParticipant]

And do these tempo limits also apply to externally-provided clocks through Midi and cv?

And while we are on the subject – are external clocks supposed to affect the Terra “immediately” or wait for 4 tap/clocks  (or other delay) before syncing?

[SomaLabsModerator]

MIDI clock requires 24 MIDI ticks for tempo changing. It is one change per quarter note.

CV clock changes each tick it receives.

For MIDI: The maximal tempo is not limited the minimal tempo is limited by 20 BPM

For CV: The maximal tempo is not limited the minimal tempo is limited by 27 BPM

[Author]

Posts