Home › Forums › Instruments › TERRA › Few questions… › Reply To: Few questions…
Hey Bernhard, welcome!
1. You can save the presets to an USB drive and reload them after firmware update. AFAIK neither the preset file format nor the engine parameters changed with the firmware updates so far, so you should be fine. (Also you could downgrade again if it fails.)
2. No.
3. You don’t need to touch the three sensors at the same time to load a preset. The process is: (1) push and hold L (2) select bank on triangle, no need to hold, you can let go of the triangle button (this step is optional, no need to dial the bank if the right one is already selected) (3) select preset A-D, 1-12. Done. So only two sensors need to ever be touched at the same time to load a preset.
Peter