Low volume from clock divider

[Ryan]

If I attach a clock divider to the trig input (or first pass it through the impulse circuit) the volume is quite a bit lower than if I play directly via the LR. Is that normal? I feel like I’ve seen different behavior in videos online, so I must be doing something incorrectly.

[Ryan]

… and of course my attack was higher than I realized. Turning that down solved the problem.

[Gabriel de Varine]

hey i’ve got the same problem but only when I use a external trigger .. and I can’t use the ADD pad in the same time ..
But on HH and CLP it’s work great !

[SomaLabsKeymaster]

Pulsar works with 0-10v. If you are triggering from Eurorack, you are likely only sending max 5v. You need a stronger trigger signal most likely.

[Author]

Posts